 |
|
|
            |
The VIM16 is a video input module designed specifically for connecting analog video inputs to your Vantage4-PRO. The VIM16 requires a vacant mounting position on the PC backplane but does not require a PCI slot as it does not plug into the motherboard. The printed circuit board on the VIM16 is divided into two areas labelled A and B. The area labelled A connects to one set of Vantage4-PRO cards and the area labelled B connects to a second set of Vantage4-PRO cards. The maximum number of Vantage4-PRO cards in any system is sixteen, therefore, the total number of cards for both sets (A and B) cannot exceed sixteen. The VIM16 is capable of providing sixteen analog video inputs to each set of Vantage4-PRO cards it is connected to. Each video overlay window can select any one of sixteen possible video inputs. The following illustration shows how the VIM16 is connected to four Vantage4-PRO cards: (Model shown VIM16-4)
Models Available VIM16-(x) Includes: If you wish to connect the VIM16 to two sets of Vantage4-PRO cards then please order a second cable set: VIM16CS-(x) Includes
(x) denotes the number of Vantage4-PRO cards you wish to connect to the VIM16 (1 - 16). The Panel-16 or Panel-16A can be provided on request as a replcement for the BNC16-Cable, contact our sales department at sales@datapath.co.uk for more information.
|
