
Network Manager
Aetria Network Manager
An appliance that simplifies the setup and management of Aetria solutions
The Aetria Network Manager appliance simplifies the setup and management of Aetria solutions.
The Aetria Network Manager appliance is provided pre-configured with Aetria Command Center software, requiring only power and a connection to the network to get started.
Description
Specification
Download
Aetria Network Manager
Aetria Network Manager is pre-configured with Aetria Command Center and is fully compatible with Aetria Workstation, Arqa and Aligo.
Aetria Network Manager Specifications
Processor | Xeon CPU-2224 3.4GHz |
Memory | 8GB 2666MT/s DDR4 ECC UDIM |
Storage | 1TB 7.2K RPM SATA 6Gbps 512n 3.5in Hot-plug HDD |
Supported System | Datapath Aetria Network Manager & Command Center |
Supported OS | Linux |
Browser Access | Safari, Edge, Chrome |
Security | HTTPS, TLS, TPM1.2/2.0, SecureBoot, Cryptographically signed firmware. Silicon root of trust. |
Ethernet | 2x100/1000Mbps full/half duplex |
I/O & Ports | 1 x front panel USB 2.0, 2 x USB 3.0 real panel, 1x IDRAC, VGA, serial connector |
Power Supply | Dual hot plug redundant PSU 350W |
Chassis Dimensions | Width: 434mm, Depth: 595mm |
Form Factor | 1U Rackmount |
Weight | 13.6 KG |
Environmental Temperature | -40 ºC to 65 ºC |
Environmental Humidity | 5-95% with 33 ºC dew point, non-condensing |
Environmental Shock | Six consecutively executed pulses in positive and negative x,y,z planes each side of the system of 71G for up to 2ms |
Environmental Vibration | 1.88 Grms @10-500Hz for 15min |
Operating Temperature | 10-35 degC continuous operation (up to 950m above sea level) |
Operating Humidity | 10-80% RH with 29 ºC dew point, non-condensing |
Operating Shock | One pulse each side of the system of 71G for up to 2ms |
Operating Vibration | 1.88 Grms @10-500Hz for 15min |
Noise Level | Max 38 dB(A) |
Compliance | CE, CB, UL, EAC, CCC, BIS, FCC |