Network Manager

Aetria Network Manager

An appliance that simplifies the setup and management of Aetria solutions

The Aetria Network Manager appliance simplifies the setup and management of Aetria solutions.

The Aetria Network Manager appliance is provided pre-configured with Aetria Command Center software, requiring only power and a connection to the network to get started.

Datasheet

Contact Sales

Support

Aetria Network Manager

Aetria Network Manager is pre-configured with Aetria Command Center and is fully compatible with Aetria Workstation, Arqa and Aligo.

Aetria Network Manager Specifications

Processor	Xeon CPU-2224 3.4GHz
Memory	8GB 2666MT/s DDR4 ECC UDIM
Storage	1TB 7.2K RPM SATA 6Gbps 512n 3.5in Hot-plug HDD
Supported System	Datapath Aetria Network Manager & Command Center
Supported OS	Windows 10, Linux
Browser Access	Safari, Edge, Chrome
Security	HTTPS, TLS, TPM1.2/2.0, SecureBoot, Cryptographically signed firmware. Silicon root of trust.
Ethernet	2x100/1000Mbps full/half duplex
I/O & Ports	1 x front panel USB 2.0, 2 x USB 3.0 real panel, 1x IDRAC, VGA, serial connector
Power Supply	Dual hot plug redundant PSU 350W
Chassis Dimensions	Width: 434mm, Depth: 595mm
Form Factor	1U Rackmount
Weight	13.6 KG
Environmental Temperature	-40 ºC to 65 ºC
Environmental Humidity	5-95% with 33 ºC dew point, non-condensing
Environmental Shock	Six consecutively executed pulses in positive and negative x,y,z planes each side of the system of 71G for up to 2ms
Environmental Vibration	1.88 Grms @10-500Hz for 15min
Operating Temperature	10-35 degC continuous operation (up to 950m above sea level)
Operating Humidity	10-80% RH with 29 ºC dew point, non-condensing
Operating Shock	One pulse each side of the system of 71G for up to 2ms
Operating Vibration	1.88 Grms @10-500Hz for 15min
Noise Level	Max 38 dB(A)
Compliance	CE, CB, UL, EAC, CCC, BIS, FCC