VisionHD4
VisionLC-HD

VisionHD4

  1. 8 Lane PCI Express Gen.3 bus
  2. 3.2 GB/s total capture bandwidth in 4 PCIe lanes
  3. Gen.3 or 8 Lanes Gen.2
  4. Frame buffer memory 4 x 256 MB
  5. Datapath unified Windows and Linux driver support
Slider

VisionHD4

Capture four DVI-I High Definition DVI streams in a single capture card.

The VisionHD4 is an eight lane PCI Express capture card with four independent video capture channels, supporting HD capture.

This video capture card provides a high performance high density video capture solution for control room, medical and other applications that require high capture bandwidth. The quad HD capture capability in combination with Datapath's multi stream and synchronisation features enables resolutions up to 4096x2048 and Quad HD solutions.

The VisionHD4 captures all four HD video channels simultaneously and triple buffers them into onboard storage for tear free video, alongside embedded HDMI audio streams can also be captured from each channel.

This full length video capture card has four capture processors, each providing 800 MB/s bandwidth.

For application case studies using this capture card:
Highway control relies on video capture and graphics technology (Malaysia)
Video capture and graphics technology riding on the Prasara Rapid Bus (Kuala Lumpur)

Specification of the VisionHD4 Video Capture Card:

Board Format Full size 8 lane PCIe 3-0 interface, 111mm x 312mm (H x L)
Connectors Two DMS59 high density video connectors
Maximum Sample Rate 170 Mpixels per second analogue RGB or 165 MHz DVI
Analogue modes up to 340 MHz pixel clock can be captured using dual-pass sampling
Maximum Data Rate 800 MB/s bandwidth per capture processor, 3.2 GB/s for the card
Video Sampling RGB: 24 bits per pixel/ 8-8-8 format
Video Capture Memory 256 MB per capture channel, triple buffered
Analogue RGB Mode Support 640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080, 1920x1200 and custom modes
DVI Single-Link Mode Support 640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080, 1920x1200 and custom modes
HD Modes 1080p, 1080i, 720p, 576p, 480p and 480i suing a Component-DVI connector.
For HDCP support contact the sales department for more information
Input Modes Detection Direct DMA to physical or virtual memory buffers with full scatter-gather support
DMA bandwidth: up to 800MB/s
16 independent DMA streams: Any mix of HD and SD sources, colour space, cropping and scaling parameters
Pixel Transfer Formats RGB: 5-5-5, 5-6-5 or 8-8-8 (24 bit, 32 bit) pixels
YUV: 16 bit (4:2:2)
MONO: 8 bit
Update Rate User defined, capture frame rate will match the source providing max data rate (800MB/s) is not exceeded.
Multi-buffered to eliminate tearing artifacts
Video Format Options Analogue RGB plus HSync and VSync (5 wire)
Analogue RGB with Composite Sync (4 wire)
Analogue RGB with sink on Green/ YPbPr (3 wire)DVI Single Link, HDMI 1.3
Operating system support Up to Windows® 10 and Linux support (NOTE: Check Linux specific features with Sales)
Power Requirements Max current at 1.9A @ 12V
Max current at 2.5A @ 3.3A
Max power 31 Watts
Operating Temperature 0 to 35 °C/ 32 to 96 °F
Storage Temperature 20 to 70 °C/ -4 to 158 °F
Relative Humidity 5% to 90% non-condensing
Warranty 3 years

We are continuously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.

Contact Sales

Datapath has a large network of distributors and resellers across the World.

Datasheets

Download the datasheets for your Datapath products - current and past.

Current & Past Products »

Downloads

Download the latest software for your Datapath products.

Current Downloads »
Legacy Downloads »

Manuals

Download the manual for your Datapath products - current and past.

Current & Past Products »