One box
Millions of possibilities
Datapath Fx4
The Datapath Fx4 is a multi-faceted stand alone display controller that supports a choice of inputs, high bandwidth loop-through as well as 4 genlocked outputs in either DisplayPort or HDMI.
Unparalleled connectivity options
1. Connect the input source to one of 2 x HDMI or DisplayPort connectors
2. Connect the input source to one of 2 x HDMI or DisplayPort connectors
3. The DisplayPort Loop is used to daisy chain multiple Fx4 units to provide more than 4 outputs
4. Each Fx4 provides four discrete monitor outputs
5. Dual ethernet ports connect the Fx4 to a network for use with our Wall Designer software. Ethernet loop through is supported on the second LAN Port
6. Directly connect to a laptop or PC using the USB cable provided for direct control with our Wall Designer software
7. When the Fx4 is switched on LEDs will begin flashing on the front of the unit for up to 15 seconds
8. Mains power connection
1
2
3
4
5
6
7
8
The Fx4 features a DisplayPort1.2 main input and two HDMI1.4 inputs. The intuitive UI allows users to determine which input is used.
Dual Ethernet ports allow users to add the device to their networks. Ethernet loop though support on the second port means only one device in the chain needs to be physically connected.
A dedicated BNC connector allows users to SYNC with third party hardware.
A dedicated DisplayPort1.2 loop through output allows users to link multiple devices. Specifically designed to prevent any loss of resolution, and the original capture signal remains unchanged.
Wall Designer allows users to add displays from the ever expanding database of monitors, visualise their content by adding inputs, backgrounds and adjusting capture regions. Finally, you can instantly configure all Datapath Fx4's either via USB or the network ports.
The next generation display controller
Read more about France’s centre of remembrance for Australia’s contribution to the First World War