Distributing signage content over the network, not dedicated video cable
AV-over-IP (audio-visual over Internet Protocol) is a method of transmitting video, audio, and control signals across standard Ethernet networks instead of dedicated coaxial, HDMI, or DisplayPort cabling. For digital signage networks, this shift means content, source switching, and system management can all travel over the same IP infrastructure a building or campus already has in place. Rather than running new AV cable to every display or relying on point-to-point matrix switching, signage operators can add, move, or reconfigure screens the same way they would add a device to any other network. The result is a signage architecture that scales with standard IT practices rather than fighting against them.
At a glance
- AV-over-IP transmits video, audio, and control signals over standard Ethernet infrastructure instead of dedicated AV cabling.
- Displays can be added to a signage network without running new point-to-point video cable to a central switcher.
- Centralized management platforms let operators control content and monitor screen status across multiple sites from one interface.
- AVoIP networks support redundancy and failover using standard networking practices such as switch and path redundancy.
- Datapath’s ActiveSQX platform provides scalable IP encode and decode for AV-over-IP signage deployments.
What is AV-over-IP, and how is it different from traditional signage distribution?
Traditional digital signage distribution relies on dedicated video paths: a media player or matrix switcher connected directly to each display over HDMI, DisplayPort, or coaxial cable. Every new screen typically means a new cable run and, in larger deployments, additional ports on a physical matrix switcher. That approach works, but it does not scale gracefully once a network moves beyond a handful of screens or spans multiple buildings.
AV-over-IP replaces the dedicated video path with network-based transmission. An encoder converts a video source into an IP stream, that stream travels across a standard Ethernet switch, and a decoder at the display converts it back to a video signal. Because the transport layer is now a network switch rather than a matrix switcher, adding a display is a matter of connecting a decoder to an available network port, not running new cable across a building.
How does AV-over-IP make digital signage networks more scalable?
Scalability is where AV-over-IP shows the clearest advantage over matrix-based signage. A hardware matrix switcher has a fixed number of input and output ports. Growing beyond that capacity means replacing the switcher or adding another unit, along with the cabling and configuration work that comes with it.
An IP-based signage network scales by adding encoders, decoders, and standard network switch ports. Because AVoIP traffic runs over the same category cabling and switching infrastructure used for general IT traffic, expansion follows the same logic as adding any other networked device.
Typical expansion scenarios
- Adding a screen to an existing zone: connect a decoder to the local network switch and register it in the management platform.
- Adding a new zone or building: extend the network using standard routing between sites and add encoders and decoders as needed.
- Increasing source count: add encoders without reconfiguring the entire signal chain.
Want to see this in action?
Talk to a specialist about designing an AV-over-IP signage network for your sites.
How does centralized management improve multi-site signage operations?
Managing signage across multiple locations traditionally means either sending staff to each site or relying on separate, disconnected control systems per building. AV-over-IP networks consolidate that control because every encoder and decoder is addressable over IP, which means source routing, content scheduling, and system health can be managed from a single platform regardless of physical location.
Datapath’s Aetria platform is built for this kind of centralized operation. It provides layout management, source routing, and operator permissions across distributed AV-over-IP deployments, so a single operator or team can push content changes, reroute sources, or monitor screen status across every site without visiting each location individually. For organizations running signage across dozens or hundreds of locations, this centralization is often the deciding factor in moving to AV-over-IP.
What centralized management typically covers
- Content and source routing to any display or group of displays on the network
- Real-time status monitoring for encoders, decoders, and displays
- Operator permission levels so site staff have appropriately scoped control
- Scheduling and layout changes pushed from a central location to any connected site
What does AV-over-IP mean for cost efficiency in signage deployments?
Cost comparisons between AV-over-IP and traditional matrix-based signage need to account for both capital and operational expense. On the capital side, AV-over-IP reduces or eliminates the need for dedicated video matrix hardware and the specialized cabling that comes with it, since standard Cat6 or Cat6a cabling and network switches carry the signal instead. Many organizations can also make use of existing network infrastructure rather than building a parallel AV-only network from scratch.
On the operational side, centralized management reduces the staff time needed to update content, diagnose faults, or reconfigure displays across sites. A fault at a remote location can often be diagnosed and, in some cases, resolved from a central management platform rather than requiring an on-site technician visit.
How does AV-over-IP improve content delivery and reliability across multiple locations?
Content delivery reliability depends on how consistently a signal reaches every display, and how quickly problems can be identified when it does not. In a matrix-based system, a fault often means physically tracing cable runs or swapping hardware on site. In an AV-over-IP network, encoders and decoders report status back to the management platform, so a dropped connection or failed unit is visible immediately rather than discovered when a screen goes dark.
Because the same content can be routed to any decoder on the network, organizations running signage across multiple locations can push updates from a single source without touching hardware at each site. This is particularly relevant for retail chains, transit hubs, and corporate campuses where content needs to change frequently and consistently across many screens at once.
Ready to plan your network?
See how ActiveSQX and Aetria work together to distribute and manage signage content over IP.
Frequently asked questions
What is AV-over-IP used for in digital signage?
AV-over-IP is used to transmit video, audio, and control signals for digital signage over a standard Ethernet network instead of dedicated AV cabling, allowing content to be routed to any connected display.
Is AV-over-IP the same as AVoIP?
Do I need a separate network for AV-over-IP signage?
How far can AV-over-IP signal travel over standard cabling?
Can AV-over-IP support multiple sites from one management platform?
Yes. Platforms such as Datapath’s Aetria are designed to manage source routing, layout, and monitoring for AV-over-IP displays across multiple physical locations from a single interface.
Does AV-over-IP reduce the cost of a signage network?
What happens if an encoder or decoder fails on an AV-over-IP network?
What Datapath products support AV-over-IP signage deployments?
Datapath’s ActiveSQX provides scalable IP encode and decode for AV-over-IP signal distribution, while Aetria provides the centralized management platform for routing, layout, and monitoring across a signage network.
Ready to build a scalable AV-over-IP signage network?
Talk to our team about designing a network that grows with your sites, not against them.



