ISE 2020

Datapath at ISE 2020

Where to find us

New products

At the show


Where to find us

Hall - 10
Stand - P182

Datapath is excited to be an exhibitor once again at the world’s largest event for AV and system integration professionals, ISE 2020. You will be able to find Datapath in Hall 10, Stand P182, where we will be featuring a number of new products and demonstrations.
Admission on the door will be available at 175 Euros, alternatively you can pre-register for FREE by using our code 913547.


New products

Take a look at the new AV solutions that will feature on our stand at ISE 2020, including Arqa, our new hard KVM solution and our most powerful graphics card yet, the Image4K.

Arqa Systems

Datapath's KVM over IP systems

Datapath’s Arqa range of KVM systems have been developed for demanding command and control environments and other AV applications. These include utility operations, process control, national defence and emergency services, corporate boardrooms, and broadcast media centres.

Arqa gives operators access to multiple remote sources from a single workspace, without sacrificing video quality or round-trip latency.

(Available Q1 2020)


Full 4K High Bandwidth Graphics Card

Designed for professional, multi-screen and video wall installations, the Image4K is a very powerful graphics card, enabling scalable solutions, that delivers full 4K60 4:4:4 content over four HDMI 2.0 outputs.

Fully integrated with Datapath’s graphical setup wizard, the Image4K is easy to configure for different combinations of monitors, projectors, or LED controllers. Output resolution, rotation and wall layout are all easily configured using the intuitive graphical interface in a matter of minutes.


Superb HDR10 colour clarity

The Datapath Fx4-HDR builds on the success of its award winning Fx4 and x4 predecessors and brings the superb HDR 10-bit colour clarity, 4K60 resolution as well as audio support into the mix.

Being shown for the first time at ISE 2020, the Fx4-HDR offers a choice of HDMI 2.0 and two additional 1.4 inputs. This multi-disaply controller is fully HDCP2.2 capable and supports a high bandwidth loop-through for daisy-chaining multiple devices and creating large video walls.

WallControl 10

NEW Features On Show

Datapath will be taking the opportunity at ISE to demonstrate all the new developments of WallControl 10, our video wall management software.
The new features on show will include the introduction of soft KVM, giving operators the ability to access and control sources anywhere within the same network, plus a web interface that allows a user to control wall layouts remotely.

Further features include added tools to help operators define and categorise video wall content more effectively.

At the show

With ISE being the world’s largest AV exhibition, we understand that with so much to see and do at the show, your time is valuable. To help ensure that you get the most out of the event, here’s a look at what will feature at the Datapath stand this year.

Video wall
management software

Datapath’s WallControl 10 software tool will help you plan, execute and manage complete video wall set ups. Whether you have a small video wall in a single location or multiple large walls across a number of sites, Datapath have a number of applications to manage and fault find when using video walls. Visit the show to get a hands-on demonstration of Datapath’s powerful yet simple-to-use wall control application.

WallControl 10 plug in for Milestone XProtect

Ideal for security applications, the WallControl 10 plug-in for Milestone XProtect® provides users with the ability to manage their surveillance and seamlessly drive multi-screen video walls within one interface. Operatives can display a variety of sources, including live and recorded camera feeds, television broadcasts and any other localised content onto their video walls.


Datapath’s Display Driver Configuration Tool (DDCT) guides you step-by-step through configuring your Datapath video wall controller. With DDCT, complex configurations are quick and easy to implement. Your video wall will be ready for use in a matter of minutes.

Wall Designer – live demo

Datapath's Wall Designer is the perfect solution to creating and managing an entire display project. Created to work seamlessly with Datapath's Fx4, Fx4-SDI and Hx4 Multi-display Controllers. Wall Designer allows project builders to easily design complex displays of all sizes and configurations.


Contact Sales

Datapath has a large network of distributors and resellers across the World.


Download the datasheets for your Datapath products - current and past.

Current & Past Products »


Download the latest software for your Datapath products.

Current Downloads »
Legacy Downloads »

User Guides

Download the manual for your Datapath products - current and past.

Current & Past Products »